Welcome!

This site is dedicated to my model railroad, the HO scale Virginia Midland Railroad. This layout comprises a 12X9 room with two levels. The upper level is complete and the lower level scenery has just begun.

I do a handful of train shows in the Virginia/Maryland region with Makin Tracks.
I also can help you find that freight car/locomotive or other hard to find item.

Email: virginiamidlandshops@gmail.com
You tube videos: http://www.youtube.com/user/Virginiamidlandrr/

Tuesday, August 13, 2013

Scenery rush and another dilemma

Spent the last week working on some scenery items on the layout.  In my last update, I replaced 2 turnouts that would help out the layout.  I finally got the Old Dominion Foods turnout installed and it looks great and more importantly it works great.  So after I got the turnouts in and wired, I was ready for some ballast.  I had a whole bag left and a little in another to work with.  I use real rock ballast and it looks great.  A lot better than the walnut shells Woodland Scenics has.  I used the little bag first and then opened the second bag.  It was not the ballast I needed.  It was super fine!  This ballast was bought from a vendor at local shows.  The vendor, Brazos & Pecos owned by Gene Browning, died earlier in the year.  I thought I had enough to finish the layout, but I did not since I bought the wrong bag last year at a show.   So I was at a stopping point.  I ordered some Highball ballast online last week and it arrived on Friday.  It was the wrong color and was not even close.  Hard to order ballast online especially when your trying to match what is down already!  So, on Saturday I was a vendor at the Lynchburg Railday train show.  I always do this show.  It's a great small show in the area.  Last time I was there, I bought the ballast from B&P.  After looking around the show, I found a vendor who's been clearing out in the last 2 shows there.  There and behold, I found not one bag, but 2 bags of the ballast I needed.  I got the 2 bags, 4 coal loads and a bag of granite loads for $9.  I was very thrilled!

Last night I finished ballasting all the mainlines on the VM.  I just glued it down a few hours ago.  It feels good to finally seeing this layout getting finished.  At least for the ballast!  I also put in an order to Scenic Express for a some grass mats and other items.  The only ballast I have left is two spurs that have no industries on them.
Add all my switch timbers last week while waiting on the wrong ballast.

The turnout at Old Dominion Foods works great.

Virginia Central trackage is drying.  Real stone ballast will always be darker when glued down.

The VM mainline is complete with ballast.  The spur to the right will be a pulpwood loading area on the VC.
Another view from the Battlefield Yard area.

I also did some work on the Battlefield yard crew house.  I used Monster Model Works concrete sheets for the parking lot,  Cannot wait to add the rest of the details.

Tuesday, August 6, 2013

Turnout replacement & track realignment

Ever since my last operational session, I wanted to replace the turnout into Old Dominion Foods and realign the Virginia Central trackage.  Well I got that going last week sort of.  The taking out of the turnouts was easy.  Both areas were ballasted in.  Warm water with some Dawn dish detergent dripped on the ballast lets the glue loose it's grip.  Then it is simply taking out the track.  I had to cut the track for the turnout into OD Foods using my Demel tool.  If you do not have one of these rotary tools, you have to get one.  Mine is a generic one I got from BJ's for $20 and came with a thousand attachments.  It's a must in track laying, or in my case track removal.

  Lets start with the VC alignment first.  This required taking out a lot more track.  I wanted this area to be more smooth to operate and a little more room in the spur trackage.  I also want to remove a turnout that was tight.  I used a Peco curved turnout to give me the most room.  I'm not total sold on it but it may look better when ballasted.

 The OD Foods turnout was a different story.  I also replaced this #4 turnout with a medium radius Peco turnout.  This spur gets mainly long mechanical reefers and they were ugly going through this turnout.  I wanted a bigger turnout to have these reefers flow into OD Foods.  It worked perfectly but I had a problem, the turnout was not DCC friendly.  So I worked on it, cut on it, and almost re-built it. I thought I had it but i did not.  I added some plastic shims to protect the frog from shorts.  I finally came to the point that I would have to put styrene in the top of the rail in the frog.  That when I said, OK I'm getting a PECO turnout that's DCC friendly.  Being totally flustered for 2 days in a row, a guy on HO- Interchange yahoo group was selling PECO DCC friendly turnouts.  A bunch of them.  He had what I needed and it's on it's way now.  The offending turnout is still in my trackage, waiting to be "ripped" out.  I got to the point where the turnout only short out when going straight through the switch.
Before shot.  Wanted to extend the spur and get rid of the turnout in the middle.

A shot from the other end.

 
New trackage in.  The curved Peco turnout gives me more options in this area.  The spur leads on the left leads to an unknown industry.  It maybe a wood chip loader.

View of the VC trackage on the other end.

The old turnout has been removed.  I believe I used a Atlas #4 turnout because it was the only one that would fit.  I mainly use #6's.

The hole is for the under the table switch machine.  I use the Atlas ones with push buttons and they work pretty good.  The Peco switch has automatic locking switch, so the switch machine will not be needed.  I covered the hole with a very thin piece of styrene.

The +$#*!@# pain in my butt turnout.  It looks good and provides smoother trackage into Old Dominion Foods.

Tuesday, July 30, 2013

Operational Session with Norm Wolf

Yesterday I had a planned operational session with Norm Wolf on the layout.  He's been wanting to come over for a while now and yesterday our schedules worked out.  He ran the V100 which runs out of Battlefield Yard (BY) to the Fredericksburg Flats industries.  He took 8 cars with him and returned with 8 cars.  Not an easy task but Norm did well.  The flats have 3 trailing industries and 3 that require you to run around your train.  The layout acted up a little but 80% was operator error (running through switches).   You can guarantee that your layout will have some shorts, a derail & a pull apart when you want to show your layout to someone.  It's Murphy's law! This stuff never happens when it's just me.   I ran the other trains that came out of staging to BY and did the switching in BY.  We ran a total of 3 trains on the layout.  The V100, a G200 grain train from Orange and the F&NN local. Here are the pics:

RF&P #124 brings in the rest of V100 train.  Norm had to wait on their arrival before he could head to Fredericksburg Flats.

F&NN power brings their small train (3 cars) into the Battlefield yard.
VMID # 292 is the yard switcher today.  He's making the RF&P's train up and just complete the F&NN train.  The F&NN train is at the top waiting to head east.  The Virginia Central cars sit on track #4.  The Virginia Central was not operated today.

Norm catches up on paper work while the F&NN train passes.  He had to clear up for the train heading east.

The G200 grain train comes into Battlefield yard.  This train came from Orange and power had to run around it's train to get into Battlefield Yard.  Older power leads this train with VMID #256 "the Red Baron".
RF&P #124 has it's train assembled behind him.  The G200 power waits in BY for it's next assignment.  A H/W load sits on the engine track.

Norm finishes up his switching since he has no other trains coming through his switching.

RF&P #124 gets an approach signal to leave Battlefield yard. 
Some of Norm's pics:
It's me switching in BY.

A B&O sand hopper bound for the VC.

The G200 grains train prepares to run around it's train.  The VC depot is in the foreground.  Norm's engine #281 sits in the upper left corner and in the clear of G200.

The BY engine track has a high & wide waiting on it's assignment.

Monday, July 22, 2013

West end signals are installed and working/ other projects

Finished up the last signals on the layout over the weekend.  All my signals are controlled by toggle switches on the fascia.  Since op session only consist of 2 people, I'm the one who will throw them.  I installed 2 Tomar regular 3 light signals and one BMLA searchlight signal.  The 2 Tomar signals are going into Battlefield Yard and the other is right across the track going west to Orange (hidden staging).  The searchlight signal is different and controls trains coming off of the Virginia Central branch line.

The other pictures are other things I'm working on this week:

The two Tomar signals.  There will be another bridge between the signals and the other overpass.  

These BMLA signals are very detailed.  Definitely different on the layout.

Got another Alco, this time a RS1.  She will work for the F&NN and will be patched.  Really liked the black and yellow!  It has a Tsunami in it and was the most challenging one I have ever had the pleasure to put in.

A high and wide load.  Gotta have a interesting load during some op sessions.  Finally got the brass wire I need for tie downs.

A side dump for a MOW train.  Gotta get some VMID lettering on it.

No this is not HO but an On30 Forney getting a new tender.  One more good days work and she will be complete.  Maybe 2 with the paint!

Saturday, July 6, 2013

New operating session partner

Spent a little time in the layout room this evening with my "new" engineer in training.  My oldest son Cameron (7) decided he wanted to run some trains tonight.  My middle son (age 5) got bored really quickly with a switching layout earlier in the week.  Cameron on the other hand picked it up pretty quickly and seemed to get use to slower pace.  I use NCE DCC and the power cab is really easy to use once you get used to it.  Cam picked it up (he's used it a few times before) quite well.

I decided not to use a switching list and we only switched out 5 cars and brought 4 empties back to Battlefield yard.  I just installed a TCS stay alive capacitor in my SD20-2 (SD35 frame) and it runs perfect.  Before it ran like crap even for a 6 axle engine.  I recommend them with Tsunamis!
Cameron blows the horn and slows while backing out some cars

Running a boxcar back to Mid-Atlantic Feeds after the empties have been pulled.

Cameron did not want to block Industrial Drive but he didn't have another option to set the empties for a bit. 
Also completed 2 locos for a customer this week.  MCIS SD22ECO #2290

MCIS SD22ECO #2291

Sunday, June 30, 2013

Messy work desk syndrome

Some people do their modeling on a work bench.  I do mine on a work desk.  A work bench is something you have your tools on in the garage!  Anyways, is it me or is keep your work desk clean hard or what?  This evening, I cleaned it of pretty good.  I had a few items I wanted to finish up,  So, I cleaned it off pretty much.  Got my little bit of work in and boom!  Its a mess again and that's the way I left it until tomorrow.  Now, I got a question.  If we cleaned up at the end of the day or a project, would be get more stuff done?  Probably!
My main work desk.  Being organized helps me big time and this was something I did about 5-6 years ago.  Labels help you find stuff faster.  But being organized doesn't keep the desk clean!


Side desk.  This area seems to collect overflow from the main desk.  The On30 layout is above this area  and HO engines are even on it.
New shot I'm using for the blog now.  These are my main engines for the VM on the layout.  There are a few missing but the "Red Baron" CF-7 makes an appearance behind the tree. 

Thursday, June 27, 2013

Regular updates and actual modeling time

Been enjoying my time off from school and trying to get some modeling done.  I got 2 custom locomotives I'm working on right now for a gentleman in Texas.  I'm about about half way done with those.  I also want to get back to updating this blog every week.

The 2 SD22ECO locos I'm building for a customer.

 So what been going on lately with me?

-Yardwork: it seems like it never ends around here.  My grass is terrible and full of weeds but its green because of all the rain we've had.  It seems that we have had storm after storm the last couple of weeks.  Had a nasty one yesterday and now the yard is calling to get up all the branches all over it!
The storm that came through yesterday.  It was a doosy!


-Deck work:  My deck was looking quite old and unstained.  I decided to get the Restore covering from Rust-oleum.  Looks really good but I need to put one more coat on it but I cannot get it done because of all the rain.  It needs a good day to dry.  Its hard work going on but it looks 100 times better.

-9th anniversary:  My wife and I celebrated our 9th wedding anniversary yesterday.  She's the best wife and mom than I could have ever asked for. 

Now trains:
I'm still working on that list of all the things I need to work on this summer.  That will be out soon.  I did the show up in Timonium this past weekend.  Sold several things.  Norm Wolf joined me up there as a last minute fill in.  Kevin Olson who usually sells with me could not make it down.

Heard about a multicolored textured paint by Rust-oleum somewhere in my travels on the internet.  Cannot remember what they used it for, so on a recent trip to Home Depot I picked some up.  I was looking for the perfect weathering inside of open hoppers.  I have a few aggregate hoppers on the layout and I usually mask the edges of the hopper and spray a primer brown in them.  So with this stuff, I do the same.  It takes a bit to dry and comes out of the can quick so be prepared.  I thought they gave it a good weathered look.  It looks to me like spray on sandpaper.  You could also use it on gondolas.
A RF&P stone hopper.  Gives a nice used looking inside.

A VMID stone hopper

Another VMID stone hopper.  These are made out of shortening a Walther 2 bay Greenville hopper.